INTEL BURN TEST 4790K MANUAL

you can monitor your temps with RealTemp TI, try to stay bellow 80C. I was using IntelBurnTest to stress test and Core Temp and HWMonitor to monitor temperatures. My system has an H105 with two Corsair Quiet Editions fans pushing through it. If that happens you need more cpuv, usually its 0x124 bsod,Д x101 bsod watch_dog is mostly low input voltage (SVID) or not enough cpu system agent voltage 0.040 - 0.070v+ offset (this is also needed if you use higher stock ram and higher OC) or cache OC too high with not enough voltage. I have an i7-4790K and wanted to stress test it before I go ahead and overclock. Later test in some more demanding game to see if its really ok., I saw stress tests apps passed but then it failed in BF4 lol Cooling: Cooling is a very important part of overclocking The Haswell line, even though has a rating 84 TDP, will heat up all the way to 130 TDP and above as the overclock rises. Speaking of brute force stress tests, use that what I linked earlier, also Asus real bench - mostly video encoding and heavy multi tasking benchmarks.ДЇor how long, 1-2 loops should be enough. Intel Burn Test: Used to test stable overclocks HWMonitor: Used to show current temps CPUz: Used to list current clock speeds and misc information. Intel extreme tuning or Aida64 stress or Intel Burn test or Prime95, etc.

INTEL BURN TEST 4790K MANUAL

when you stress test, used manual /fixed cpu voltage instead of auto, so it doesn't overvolt extra in AVX apps., e.g. disable Asus multicore enhancement, its only if you running stock so it syncs all 4 cores to max auto turbo, e.g. The Core i7-6700K is no faster than the 4790K when measuring gaming performance with the GTX 980 and this isnt too surprising given what weve already. in cpu power control, disable iVR fault management., for better OC and so it doesnt over-volt internal iVR. i run at 58 fps smooth on ground and in the air its goes up to about 68-69, with all. I have nvidia inspector set to 58 fps lock with vsync helping input lag and 8 maximum pre rendered frames set. In tweakers paradise you can keep all at auto too. I have the i7-4790k OC to 4.9 with water cooling and let me tell you, FSX runs so smooth. if you thought p95 stressed your system IBT will add 10C to your temps and really stress it.

which also seems a bit higher to the previous 62C when it was behaving normal. On the other hand, it touches 70C at stock clocks. if you thought p95 stressed your system IBT will add 10C to your temps and really stress it. When I overclock i7 4790K at 4.5GHz with 1.12vcore in bios, and put it on torture test of Prime 95 25.11v, it jump straight to 85C-90C within 3 minutes. In DIGI+, keep all at auto except for cpu power current, set to 120 or 130%., for more powr when CPU is OC'ed. also for your cpu, try intel burn test, that will really mess with your overclocks lol. 1.79v, why? So it doesnt overvolt when OC'ed its also recommended by Asus to be disabled.

Disable SVID controll and manually input eventual voltage e.g.

Intel burn test 4790k